Difference between revisions of "CI-V interface"

From Tučňák Wiki
Jump to: navigation, search
(Photos)
(Photos)
Line 23: Line 23:
  
 
On the pictures is version for IC-706MKIIG - supply is connected to microphone RJ-45, pin 1.
 
On the pictures is version for IC-706MKIIG - supply is connected to microphone RJ-45, pin 1.
 +
 
Used box can be obtained here: http://krabicky.cz/viewproduct.php?=SID&productid=200
 
Used box can be obtained here: http://krabicky.cz/viewproduct.php?=SID&productid=200

Revision as of 17:40, 21 November 2008

Tested with: IC-706MKIIG, IC-7400


Schematics

Schematics of USB2CIV

I've used my favourite USB to serial converter FT232RL in recommended wiring. After many experiments I've found it is not possible to make interface without supply from radio. Radio provides voltage through high impedance. It can work statically but reach real communication speeds is impossible, rise edges are too slow. Supply can be about +5 to +12V . For my purpose best fits +8V from microphone connector (pin 1) next to the CI-V jack.

PCB

Photos

On the pictures is version for IC-706MKIIG - supply is connected to microphone RJ-45, pin 1.

Used box can be obtained here: http://krabicky.cz/viewproduct.php?=SID&productid=200