Difference between revisions of "Front panel IC-706"
(New page: =Cable= '''Pin Signal Color Description''' 1 LRXD Yellow Data transfer from front panel to the radio. 2 LTXD Black Data transfer from radio to the front pa...) |
|||
| Line 1: | Line 1: | ||
| − | =Cable= | + | =Cable pinout= |
'''Pin Signal Color Description''' | '''Pin Signal Color Description''' | ||
1 LRXD Yellow Data transfer from front panel to the radio. | 1 LRXD Yellow Data transfer from front panel to the radio. | ||
| Line 7: | Line 7: | ||
5 GND Shield Data, power, output audio and power control ground. | 5 GND Shield Data, power, output audio and power control ground. | ||
6 MIC White Microphone input. | 6 MIC White Microphone input. | ||
| − | 7 MICE Green shield Microphone | + | 7 MICE Green shield Microphone ground. |
8 PWK White Power control (switch ON button). Active in low. | 8 PWK White Power control (switch ON button). Active in low. | ||
| + | |||
| + | =Switch on= | ||
| + | Power switch on panel turns PWK signal to low (ground). Radio turns on supply voltage on pin 8V. | ||
| + | |||
| + | =Communication= | ||
| + | Both sides communicate at 19200 Baud, 8 bits, no parity, 1 stop bit. Protocol is similar to CI-V control. AFAIK it is not published so next informations are taked by reverse-engineering. | ||
| + | |||
| + | * Packet starts with Preamble code ('''0xfe'''). | ||
| + | * Second byte is probably Command number. | ||
| + | * Third byte is probably Sub command number. Mostly 0x00. | ||
| + | * Folowing Data area with variable length. | ||
| + | * Last byte is End of message code ('''0xfd'''). | ||
| + | |||
| + | =Commands= | ||
| + | ==0x0b== | ||
| + | Keepalive packet sent from panel to radio about every 100 ms. When no packet is received by radio in about 200 ms, it switches itself off. To provide reliable work over IP networks, this packet should be emulated. | ||
| + | |||
| + | ==0x60== | ||
| + | Data to display on panel. Looks like bitmask controlling particular LCD segments/LEDs. No detailed description available at this time. | ||
Revision as of 09:28, 18 February 2009
Cable pinout
Pin Signal Color Description 1 LRXD Yellow Data transfer from front panel to the radio. 2 LTXD Black Data transfer from radio to the front panel. 3 8V Blue DC power (8V) to the front panel. 4 AF Red Output audio to headphone jacket. 5 GND Shield Data, power, output audio and power control ground. 6 MIC White Microphone input. 7 MICE Green shield Microphone ground. 8 PWK White Power control (switch ON button). Active in low.
Switch on
Power switch on panel turns PWK signal to low (ground). Radio turns on supply voltage on pin 8V.
Communication
Both sides communicate at 19200 Baud, 8 bits, no parity, 1 stop bit. Protocol is similar to CI-V control. AFAIK it is not published so next informations are taked by reverse-engineering.
- Packet starts with Preamble code (0xfe).
- Second byte is probably Command number.
- Third byte is probably Sub command number. Mostly 0x00.
- Folowing Data area with variable length.
- Last byte is End of message code (0xfd).
Commands
0x0b
Keepalive packet sent from panel to radio about every 100 ms. When no packet is received by radio in about 200 ms, it switches itself off. To provide reliable work over IP networks, this packet should be emulated.
0x60
Data to display on panel. Looks like bitmask controlling particular LCD segments/LEDs. No detailed description available at this time.
