Davac4

Davac 4.1 OK1ZIA

Davac 4.1 is updated version of Davac 4.0 designed in 2008.

News

• IRLML2264 instead of IRF7220
• Silscreen cleanup
• Values on silkscreen
• Jack holes are 2 mm
• Guard ring connected to GND
• Manufacturing data for jlcpcb.com included

Circuit diagram

Circuit diagram of Davac 4.1

PCB

• 
  PCB bottom side (600 DPI)
• 
  Components placement top
• 
  Components placement bottom

Note: 600 DPI have images in Full resolution, MediaWiki uses thumbnails.

Parts

Transformer TR-1/1 www.tme.eu

Jack 6.35 K3606D www.gme.cz or K36092B

White connectors for cable pins

Black connectors for cable flat cable

Program the FT232R

As default, the FT232R acts as serial port. But Tucnak uses Libftdi to access it in bitbang mode. Default VID:PID must be changed to distinguish Davac from other USB serial ports.

Linux

I'm pretty sure you can use ft232r_prog. But I have no experiences with it. If you try it, please let me (OK1ZIA) know, I will update this information.

Windows

MProg with loaded Davac4.ept

Under Windows, use MProg. Download File:Davac4.ept and open it in MProg. Note on Windows XP you need D2XX drivers; on newer versions they are installed automatically.

Unplug all other FTDI devices and press the Program All Existing Devices button.

Install USB drivers

Linux

You have nothing to do, It will work automatically. Only on specific distributions you may have to set permissions to USB device, which is normally done by udev script.

Windows

Zadig with Davac4

Under Windows 7 or newer, use Zadig. On XP use 2.2.

Click Options, List All Devices.

Keep libusbK and press Install Driver.