Davac4: Difference between revisions
| Line 40: | Line 40: | ||
===Windows=== | ===Windows=== | ||
[[Image:Davac4.png|thumb|none|666px|MProg with loaded Davac4.ept]] | [[Image:Davac4.png|thumb|none|666px|MProg with loaded Davac4.ept]] | ||
Under Windows, use [http://tucnak.nagano.cz/download.php#mprog MProg]. Download [[File:Davac4.ept]] and open it in MProg. | Under Windows, use [http://tucnak.nagano.cz/download.php#mprog MProg]. Download [[File:Davac4.ept]] and open it in MProg. Note on Windows XP you need [https://www.ftdichip.com/Drivers/D2XX.htm D2XX drivers]; on newer versions they are installed automatically. | ||
'''Unplug all other FTDI devices''' and press the '''Program All Existing Devices''' button. | '''Unplug all other FTDI devices''' and press the '''Program All Existing Devices''' button. | ||
Revision as of 07:28, 25 April 2019
Davac 4.0 OK1ZIA
Davac 4 was succesfully built by OK1USW, OK1UGE and OK2JTB.
Circuit diagram
PCB
-
PCB bottom side (600 DPI) -
Components placement top -
Components placement bottom
Note: 600 DPI have images in Full resolution, MediaWiki uses thumbnails.
PCB www.hamshop.cz
Ondra OK1CDJ has made PCBs and offers it at www.hamshop.cz. Many TNX!
Errata
- Jack holes are slightly smaller - user Dremmel milling cutter
- Parts values would be shown - use schematic
Parts
Jack 6.35 K3606D www.gme.cz or K36092B
White connectors for cable pins
Black connectors for cable flat cable
Program the FT232R
As default, the FT232R acts as serial port. But Tucnak uses Libftdi to access it in bitbang mode. Default VID:PID must be changed to distinguish Davac from other USB serial ports.
Linux
I'm pretty sure you can use ft232r_prog. But I have no experiences with it. If you try it, please let me (OK1ZIA) know, I will update this information.
Windows
Under Windows, use MProg. Download File:Davac4.ept and open it in MProg. Note on Windows XP you need D2XX drivers; on newer versions they are installed automatically.
Unplug all other FTDI devices and press the Program All Existing Devices button.
Install USB drivers
Linux
You have nothing to do, It will work automatically. Only on specific distributions you may have to set permissions to USB device, which is normally done by udev script.
Windows
Under Windows 7 or newer, use Zadig. On XP use 2.2.
Click Options, List All Devices.
Keep libusbK and press Install Driver.
SMT variant by OK2JTB
-
Top side -
Bottom side -
Photo 1 -
Photo 2 -
Photo 3 -
Schematics
All data: File:Davac4-ok2jtb.zip
Made by OK1UDC(SK) & OK1UGE
-
Front panel -
Back panel -
Components side
Note OK1ZIA: better use USB-B type connector
Combined Davac4 and contest machine RPi
Guys from OK1RPL made this amazing compact contest solution.
